Hot Runner Coil Heater with Thermocouple Type J K
Product Description
1. Introduction
Cable / coil heater with required length, wattage, voltage, can be coiled or bend to any shape when the end user want. They are fully annealed and can acquire any shape, they should be formed to a final shape in a single attempt.
Heaters can be coiled to lengths greater than shown with or without wattage profiling. Coil lengths can be much longer than those shown depending on coil spacing.
Coil lengths based on a closed coil. Coils can be stretched for distributed wattage and/or much longer coil lengths.
All heaters are 230V.
All heaters have 1000mm leadwire with stainless steel overbraid PVC, fiberglass and a ground wire.
Heaters are available with and without thermocouple.
Most heaters are 4.2*2.2mm square cross section.
2. Parameters:
Cross Section |
Total Length/Heating Length |
T/C |
WATT/VOLT |
Lead Wire |
2,2×4.2 |
300/250mm |
J |
195W x 230V |
1000mm |
2,2×4.2 |
330/280mm |
J |
215W x 230V |
1000mm |
2,2×4.2 |
385/335mm |
J |
240W x 230V |
1000mm |
2,2×4.2 |
450/400mm |
J |
300W x 230V |
1000mm |
2,2×4.2 |
510/460mm |
J |
350W x 230V |
1000mm |
2,2×4.2 |
570/520mm |
J |
400W x 230V |
1000mm |
2,2×4.2 |
650/600mm |
J |
460W x 230V |
1000mm |
2,2×4.2 |
750/700mm |
J |
530W x 230V |
1000mm |
2,2×4.2 |
850/800mm |
J |
610W x 230V |
1000mm |
2,2×4.2 |
950/900mm |
J |
690W x 230V |
1000mm |
2,2×4.2 |
1160/1110mm |
J |
850W x 230V |
1000mm |
2,2×4.2 |
1360/1310mm |
J |
950W x 230V |
1000mm |
2,2×4.2 |
1600/1550mm |
J |
1100W x 230V |
1000mm |
2,2×4.2 |
1850/1800mm |
J |
1200W x 230V |
1000mm |
2,2×4.2 |
2300/2250mm |
J |
1300W x 230V |
1000mm |
2,2×4.2 |
2550/2500mm |
J |
1500W x 230V |
1000mm |
3. Advantages:
Good for purchasing by large quantity, easy to pack.
Fully annealed.
Ender user can change the shape accordingly.
Good unformity.
Rapid response.
4. Application
HOT RUNNER NOZZZLES
CUTTING AND SEALING BARS
MEDICAL EQUIPMENT
ROD, PIPE AND TUBE HEATING
HEAT TRACING
SEMICONDUCTOR MANUFACTURING
5. Termination:
Plain leads with high temperature sleeve
High temperature lead wire with a fiberglass jacket exiting from a transition bracket, which sealed with high temperature cement.
Stainless steel braided
The stainless steel braid, provides abrasion resistance and maintains high flexibility.
6. Photos for reference![Hot Runner Coil Heater with Thermocouple Type J K](//www.micstatic.com/athena/img/transparent.png)
![Hot Runner Coil Heater with Thermocouple Type J K](//www.micstatic.com/athena/img/transparent.png)
![Hot Runner Coil Heater with Thermocouple Type J K](//www.micstatic.com/athena/img/transparent.png)
![Hot Runner Coil Heater with Thermocouple Type J K](//www.micstatic.com/athena/img/transparent.png)
![Hot Runner Coil Heater with Thermocouple Type J K](//www.micstatic.com/athena/img/transparent.png)