Industrial Heating Elements Nozzle Heaters
Product Description
1. Coil Heater Working Principle
Coil heater with required length, wattage, voltage, can be coiled or bend to any shape when the end user want. They are fully annealed and can acquire any shape, they should be formed to a final shape in a single attempt.
Heaters can be coiled to lengths greater than shown with or without wattage profiling. Coil lengths can be much longer than those shown depending on coil spacing.
- Coil lengths based on a closed coil. Coils can be stretched for distributed wattage and/or much longer coil lengths.
- All heaters are 230V.
- All heaters have 1000mm leadwire with stainless steel overbraid PVC, fiberglass and a ground wire.
- Heaters are available with and without thermocouple.
- Most heaters are 4.2*2.2mm square cross section.
2 . Coil Heater Standard Sizes
Cross Section |
Total Length /Heating Length |
T/C |
WATT/VOLT |
Lead Wire |
2,2x4.2 |
300/250mm |
J |
195W x 230V |
1000mm |
2,2x4.2 |
330/280mm |
J |
215W x 230V |
1000mm |
2,2x4.2 |
385/335mm |
J |
240W x 230V |
1000mm |
2,2x4.2 |
450/400mm |
J |
300W x 230V |
1000mm |
2,2x4.2 |
510/460mm |
J |
350W x 230V |
1000mm |
2,2x4.2 |
570/520mm |
J |
400W x 230V |
1000mm |
2,2x4.2 |
650/600mm |
J |
460W x 230V |
1000mm |
2,2x4.2 |
750/700mm |
J |
530W x 230V |
1000mm |
2,2x4.2 |
850/800mm |
J |
610W x 230V |
1000mm |
2,2x4.2 |
950/900mm |
J |
690W x 230V |
1000mm |
2,2x4.2 |
1160/1110mm |
J |
850W x 230V |
1000mm |
2,2x4.2 |
1360/1310mm |
J |
950W x 230V |
1000mm |
2,2x4.2 |
1600/1550mm |
J |
1100W x 230V |
1000mm |
2,2x4.2 |
1850/1800mm |
J |
1200W x 230V |
1000mm |
2,2x4.2 |
2300/2250mm |
J |
1300W x 230V |
1000mm |
2,2x4.2 |
2550/2500mm |
J |
1500W x 230V |
1000mm |
Product Parameters
4. Coil Heater Parameter
Sheath Material |
Cr Ni-Steel |
Insulation Material |
MgO |
Resistance Wire |
Ni Cr 80-20 |
Maximum Sheath Temperature |
700°C |
Die Electrical Strength |
800V A/C |
Insulation |
>5 M W |
Thermocouple |
J type (Standard) or K type |
Length Tolerance (Straight) |
5% |
Wattage Tolerance |
+ 10% (+ 5% Available Upon Request) |
Resistance Tolerance |
+ 10% (+ 5% Available Upon Request) |
Unheated Length |
35mm (Standard) |
Dimensional Tolerance |
Coil I.D + 0.1 to 0.2mm |
Coil Length + 1mm |
5. Coil Heater Imported Raw Materials
a. The coil heater resistance is used
German Nickel Chrome wire, can be coiled and straight.
b. The insulation material magnesium oxide powder is imported from
USA; which ensures the high performance, fast response time and good unformity.
Heating photo for example
Our Advantages
6. Advantage:
- Good for purchasing by large quantity, easy to pack.
- Fully annealed.
- Ender user can change the shape accordingly.
- Good unformity.
- Rapid response.
7. Termination:
Plain leads with high temperature sleeve
High temperature lead wire with a fiberglass jacket exiting from a transition bracket, which sealed with high temperature cement.
Stainless steel braided
The stainless steel braid, provides abrasion resistance and maintains high flexibility.
Detailed Photos
8.Photo for reference