Product Description
Industrial Far infrared Ceramic Electric Heater
1. Introduction
Ceramic Infrared Heater is efficient, robust heaters which provide long wave infrared radiation.
The working under temperature 300°C to 700°C (572°F - 1292°F) producing infrared wavelengths in the range of 2 to 10 micron, which is in the most suitable distance for plastics and many other materials absorb.
A range of aluminized steel reflectors are also available to ensure that most of the radiation generated is reflected forward on to the target area.
Our Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against any damage.
Longer service life is achieved since the resistance of the heaters is made to remain constant over the whole temperature range. The glaze used in this heater has excellent radiation properties therefore the radiation efficiency is also very high.
2. Construction & Material
Insulator: High thermal shock resistance ceramic material
Resistance wire: High quality Ni80Cr20
Glaze Layer: good radiation metal oxide materials with moderate additives to increase radiation intensity and enhance the suitability of the glaze.
Thermocouple : built in thermocouple available
3. Color Available: white, blacl, and yellow
4. Sizes Available
| Size(mm) |
Type |
Power |
| 60*60 |
Curved/flat/Hollow |
Available in 125w and 250w |
122*60/
120*60 |
Curved/flat/Hollow |
Available from 125w to 500w |
122*122/
120*120 |
Curved/flat/Hollow |
Available from 150w to 750w |
| 245*60 |
Curved/flat/Hollow |
Available from 150W to 1000w |
| 245*80 |
Curved/flat/Hollow |
Available from 150w to 1000W
|
5. Drawing
6. Advantages:
1. Radiation feature: The monochromatic radiation rate of our infrared ceramic heater reaches 90%, and the reverse radiation rate is larger than 83%.
2. Thermal response time: Less than 20 minutes from the room temperature to the set temperature
3. Durability: The surface keeps smooth after five times heating and cooling exchanges.
4. The radiation surface temperature uniformity: ≤15%
5. Power error: ≤5%
6. Cold insulation resistance: 500V mega meter >2m
7. Thermal insulation resistance: 500V megameter >0.5m
8. Average Operating Life-Up to 20,000 hrs depending on conditions.
8. Recommended radiation distance from heater is 100 mm to 250 mm.
9. Supplied with 100mm ceramic beaded power leads.
5. Application
- In Thermoforming & Vacuum Forming Machines
- In PVC Pipe Belling / Socketing Machines
- In Hot Stamping Machines
- As Heat Therapy Equipment
- In Shrink Packaging
6. Factory Production Photos
){kind=link}