|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Type: | Tubular |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Resistance heating wire | NiCr 80/20 wire |
| Sheath | stainless steel 304,321,316, Incoloy 800, Incoloy 840 |
| Maximum temperature | 800 degree Celsius |
| Wattage Tolerance | +5%, -10% |
| Resistance tolerance | +10%, -5% |
| Voltages available | 380V,240V, 220V,110V,36V,24V or 12V |
| Length tolerance | ±1 mm |
| Diameter tolerance | -0.02mm |
| Standard Cold Zone | 5-10mm |
| Delivery time | 7-10 working days |
| Insulation resistance (cold) | ≥ 500 MΩ |
| Maximum leakage current (cold) | ≤ 0.5 mA |
| Thermocouple Location | type J |
| type K | |
| Water Heating | We recommend 10 watts per square centimetre when cartridges are to be immersed in water because the water removes the energy from the element very effectively. Commonly used as a chemical solutions heater. | ||
| Oil Heating | Commonly used as engine sump heaters. When heating some oils, only 2 watts per square centimetre can be used otherwise the high cartridge heater surface temperature causes the oil to oxidise and carbon to be built-up on the surface of the heater. When this occurs, the carbon can thermally insulate the cartridge heater, causing the unit to heat up internally, often resulting in electrical failure. | ||
| Air Heating | Elements of approximately 1 watt per square centimetre are suitable for convection air heating, eg. Anti-condensation heaters. | ||
| Die Heating | Manifolds, hot runners and torpedoes. Packaging Hot melt glue applicators. |
||
7. Cartridge Heaters Package
| 1.Type of Cartridge Heater (shape, striaght or right angle) |
| 2.Diameter of Tube |
| 3.Overall length for Cartridge Heaters. |
| 4.Wattage & Voltage |
| 5.Lead type ( glass fibre / PTFE ) & lead length. |
| 6.The lead wire length. |
){kind=link}